Netgear R6400 WiFi Router Hardware Information

Document created by shaw-jamesp on Nov 21, 2016Last modified by shaw-jody on Mar 23, 2018
Version 6Show Document
  • View in full screen mode

Learn about the hardware specs for the Netgear R6400 router. Information and specifications for the Netgear R6400 Router. Improve your WiFi speed and reliability with the Netgear R6400 WiFi router. This equipment is used in Fibre to the Home accounts.

 

This article provides insight into:

 

Netgear R6400 WiFi router

Learn about the various functions and buttons on the Netgear R6400 WiFi router.

 

Netgear R6400 Router Top Down
Netgear R6400 Lights

 

LabelLight Sequence

Power

Power icon

Solid White Light: The router is ready
Blinking White Light: The firmware is corrupted.
Solid Amber: The router is starting
Blinking Amber: The firmware is upgrading, or the Reset button was pressed.
Off: Power is not supplied to the router.

Internet

Internet icon

Solid White: The Internet connection is ready.
Solid Amber: The router detected an Ethernet cable connection to the modem.
Off: No Ethernet cable is connected between the router and the modem

DSL

Netgear R6400 DSL Logo

The DSL light is deactivated

2.4GHz

2.4 GHz Logo

Solid White: The 2.4 GHz WiFi radio is operating.
Blinking: The router is sending or receiving WiFi traffic.
Off: The 2.4 GHz WiFi radio is off

5.0 GHz

5 GHz logo

Solid White: The 5 GHz WiFi radio is operating.
Blinking: The router is sending or receiving WiFi traffic.
Off: The 5 GHz WiFi radio is off

Lan 1-4

Lan 1-4 Button icon

When solid, these lights indicate that a connection has been detected. If flashing, this indicates that data is currently transmitting through this Ethernet port.

USB 3.0 Storage

USB 3.0 Storage - button icon

USB 3.0 Storage Port is deactivated.

USB 2.0 Printer Port

USB 2.0 Printer Port - button icon

USB 2.0 Printer Port is deactivated.

Wireless

Wireless button icon

Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
If this LED is lit, the WiFi radios are on.
If this LED is off, the WiFi radios are turned off and you cannot use WiFi to connect to the router.

WPS

WPS button icon

This button lets you use WPS to join the WiFi network without typing the WiFi password. The
WPS LED blinks white during this process and then lights solid white.

 

Rear View
Netgear R6400 Router rear panel
ResetReset the router to factory defaults

Ethernet

1-4

Connects the modem to an Ethernet-equipped computer or third party device (router, Ethernet hub, etc.)
Wan Port
Connection point for the cable that runs either into a modem for connecting to the Internet.
USB PortDeactivated
Power On/Off Button
Resets the modem to factory default settings
PowerConnects modem to the power supply

Back to Top

 

Details/Specifications

Here are some additional details about the Netgear R6400 WiFi router.

 

Details/Specifications
DocsisN/A
WiFiYes
Wireless Standard802.11 b/g/n
Operational Frequency2.4GHz, 5.0 GHz
Ethernet10/100 Mbps
WPS AvailableYes
SecurityWEP, WPA, WPA2

Router Settings Login URL

http://192.168.0.1/ 

Back to Top

 

Related Articles

 

 

Attachments

    Outcomes