Learn about the hardware specs for the Netgear N600 WiFi router. Information and specifications for the Netgear N600 WiFi Router. Manage your home network with the Netgear N600 dual band router. This equipment is used in Fibre to the Home accounts.
This article provides insight into:
Netgear N600 WiFi router
Learn about the various light sequences and functions of the Netgear N600 wireless router.
|Netgear N600 Router|
Solid Green: The router is ready
Blinking Green: The firmware is updating or someone pressed the Reset button.
Off: Power is not supplied to the router
Solid Green: The Internet connection is ready.
Off: No Ethernet cable is connected between the router and the modem.
Solid Green: The 2.4GHz WiFi radio is operating.
Blinking: The router is sending or receiving WiFi traffic
Off: The 2.4GHz radio is off
Solid: A powered-on device is connected to the Ethernet port
Blinking: The port is sending or receiving traffic.
Off: No device is connected to the Ethernet port
|USB||USB 3.0 Storage Port and USB 2.0 Printer Port are deactivated.|
Solid Green: Someone used WPS to connect to the WiFi network
Blinking (Two Minutes): Someone pressed the WPS button on the router to join the WiFi network
|WPS Button||The WPS button lets you use WPS to join the WiFi network without typing the WiFi password.|
|WiFi On/Off||Pressing the WiFi On/Off button for two seconds turns the WiFi radios on and off|
|Connects the modem to a computer or third party device (router, Ethernet hub, etc.)|
|WAN Port||Connection point for the cable that runs either into a modem for connecting to the Internet.|
|Reset Button||Resets the modem to factory default settings|
|Power On/Off||Turns the power on or off for the router|
|Power||Connects modem to the power supply|
Back to Top
Here are some additional details about the Netgear N600 WiFi router
|Wireless Standard||802.11 b/g/n|
|Operational Frequency||2.4GHz, 5.0 GHz|
|Security||WEP, WPA, WPA2|
Router Settings Login URL
Back to Top