When I look into the PVR history it states "Not recorded due to a cancellation by the system." My DVR Recording is only 60% Full. What is causing the "system" to not record my shows?
Has this happened on recordings of different shows or specific to one series recording? Some things you could try would be to re-create the recordings or powercycle (unplug from power, then reconnect) the PVR.
It is happening to series programming of a variety of shows on a variety of stations. I unplugged the DVR from the power and reconnected but still no change. It is recording without the series aspect as I set it to record one show and it worked, so it seems to be the series recording that is not happening.
I appreciate all of your assistance in this matter.
Just to double check, did you try [shaw]andrew's suggestion of removing and recreating the series recording? It sounds like you've got at least a few setup, so maybe even try that with one to begin with to see if it helps.
aerobicdiver, as this is happening for multiple programs you may be trying to record too many programs at once. If you are trying to record more than 2 programs at once the program will look like it is going to record, except there will be a line through the recording icon. You will want to check for this under Future Recordings in the PVR menu beforehand. Hope this helps.
I just had the same problem and found unplugging and plugging the box back in worked.
Retrieving data ...