HDPVR was unplugged fro approx. 15 secs. how long before the guide returns, it has been over 3 hrs now.
Anytime the PVR is unplugged, it will need to download the guide information from the servers. I’m guessing this is the older guide. After about 20 minutes you should start seeing some items filling in, but for the full guide (two weeks etc) it will take a few hours. If after 3 hours there is still no guide information at all, check the following:
Press Settings button 2-3 times till you see a menu.
Select Cable Box Setup. If you do not see it, look for Setup and select this first, then you should see it.
Go into Select to Display, you should see Messages about 3rd line down. Check to see if this number is climbing.
If it is, that’s good, that means the PVR is receiving information from the server. You may want to pull power out once again for 2 min, then plug it back in, but only if there is no guide information at all. Otherwise just leave it and it should be filled in by morning at the latest.
If however this number is not climbing, then there is a problem. Pull power out, and reseat the cable ends, unscrewing off the wall and off the box, then screw back on and plug back in. Give it a few minutes then check the same spot to see if that number has started to climb.
Retrieving data ...