My PVR will not record two programs at same time.
They are on different channels at slightly different start times.
This keeps happening. A window popped up and said
cancel one of the recordings.
It seems to be working now. Thanks for the good advise.
which PVR model?
Do you have another show recording before this one starts?
My PVR is 500GB DCCX3510-M.
Yes, one of the two programs started before the other.
I was meaning a 3rd..
But the DCX3510, I have no ideas, for the other PVRs I would have suggested turning on DVR clipping
Try rebooting it maybe? Unplug the power for 60 seconds, then plug back in, give it 2-3 minutes to boot back up, see if it works then
Hey debrac68, are you still getting that popup asking you to cancel one of your recordings? As kevinds suggested, pull the power cord to reboot it.
I would also recommend doing this test when you don't have any recordings already on the go. Turn to a channel and push the REC button on the remote to get it to record. Then turn to a second channel and set it to record as well. Does the second recording start or does it give you that popup?
Retrieving data ...