using a pace dvr. can't get any sound on channel 6
Try this, on your remote press Menu button x 2, arrow over to the Setup menu, select that, Select Audio Setup, arrow down to Descriptive Video Service, press left arrow on your remote to turn it Off.
In order: Main Menu > Setup > Audio Setup > Descriptive Video Service > Off
Audio should now return.
The first thing I would check is to make sure MTS (Multiple TV Sound) or SAP (Secondary Audio Programming) is turned off on your TV audio settings. Grab the remote that came with your TV (Toshiba, Sony, JVC, etc remote), then go into audio settings and make sure this setting is off.
My other pvr has sound on channel 6 on both tvs. Could it be a problem with the pace pvr?
It could be the PVR. You can try unplugging it from power for 10 seconds if you have not already. Check the MTS/SAP setting on your TV though too. If this feature has been turned on accidently you can get this type of treatment.
I have 3 choices on mts ~~~ stereo - auto sap - mono. tried pvr on another tv still no sound on channel 6. When i switch to 6 i get about 2 words and then silence.
problem fixed. thanks guys
From those three, you want Stereo
Retrieving data ...