My remote was set up to turn on and off my t.v. and HD box at the same time.
What do I do to make it so that it turns them both on or off at the same time?
It will turn box off, but not t.v..?
TV Power - Did your TV turn off/on?
Set your TV to match what your cable terminal currently is - both devices either on or off.
Press and Hold Setup until device light flashes Twice,
Enter 9-9-5 that device light should flash twice again
Press Power Once
Press Cable then Power
Press TV then Power
Press Cable then press and Hold Setup until Cable flashes twice.
This should re-program the Master Power feature.
he set it up, it worked that day. The t.v. doesnt turn off, just the box.
If you just push TV then power, does it turn on and off?
yes, it turns t.v. off when I hit t.v. and power
Then try the master-power programming procedure again.
it didnt work. should both devices be off when i do the master re program or????
Both should be on, or both should be off, when you use Master Power, it sends a power command to each, so if they are differnet, one will turn on, and the other off.
Tried new batteries?
Retrieving data ...