I want to assign volume control on Shaw remote to control volume of the LG NB3520A sound bar, instead of controlling volume of the TV. Can't figure it out, help will be appreciated.
The remote you have only has the ability to program Televisions, and Television combo devices such as (TV/VCR, or TV/DVD).
You will need to obtain an Atlas remote that has this extra feature to add audio devices.
The Atlas Remote looks like this:
You should be able to obtain one of these remotes by coming into our retail office or asking one of our MODS to assist you with this further.
With regards to the proper codes for LG Sound Bar, Zenith or Goldstar codes might work if the LG codes are not working for you as they may have similar frequencies as LG remotes.
Hope this information helps!
Which remote do you have?
Note: The Shaw Gateway remote will select the last programmed device as the controller for volume on your TV. If you want the audio system to control the volume, please program that device after your television set.
Thanks for the guidance, but it doesn't help much as both, the user guide nor the urcsupport.com have any codes for sound bars or any other audio devices, they only have codes for TV's and combo TV's. I can't find the code for LG NB3520A soundbar anywhere else either. Is there any other way to accomplish what I want?
Try 1293 first, its the only LG code urcsupport.com had for the NB3520A.
That remote will not work with the Portals.
The remote that amcan12 has is 2020B0-B1 stated above, which is the Champ remote that is to be used with our Motorola devices and not the Gateway System. The MP2000 remote is for the Gateway system.
MP2000 Gateway Remote: 2020B0-B1 Champ Remote:
Hope this helps!
Ahhh Icic my bad..
went to Shaw store and exchanged my Champ remote for the Atlas remote as suggested by dayne. Got back home, set codes for TV and sound bar, set code for Master power and locked the volume to the sound bar. Works perfectly so far. Thanks again.
Retrieving data ...