Is it possible with the Arris XB6 to have a device in the DMZ and have the unit in Bridge mode at the same time? Or, better still, have the device in Bridge mode but also have a secondary IP address for a 2nd network?
This is a bit outside of our scope of support. Personally, I don't believe a DMZ can be active when the modem is bridged. However, if you do have a secondary IP enabled, bridging the modem will give you access to two IPs for two separate networks.
Hope that helps,
Tony | Community Mod.
We got it all setup by adding the secondary IP which did what I needed.
Retrieving data ...