My older PVR box will only show channels 2 to 13. I try to automatically let TV download all the channels but the rest are always x out as skip these channels. Don't know how to reset all back to normal.
older PVR? Shaw PVR? Or non-Shaw? if non-Shaw make sure it is set to Cable instead of Air - the channel to frequencies are different.
If it is a Shaw PVR, your TV shouldn't be changing the channels, but it might need a reset to fix it's channel issues.
Any luck so far delaurin? If you do have our PVR, then it sounds like maybe your TV is on the CABLE or TV input and the picture from the PVR isn't actually being shown on your screen. Check which cable you've used to connect your PVR to your TV and then make sure your TV is on that input (if you're using an HDMI cable for example, switch your TV to the HDMI input, although there may be more than one input for each type). Also, try pulling the power from your PVR for a good 30 seconds.
Let us know
Retrieving data ...