Is it possible to set the Gateway Remote Control to control the volume and power on/off of the connected 5.1 Amplifier, so I do not have to use 2 seperate controls.
The gateway remote can control some audio devices. when you are programming in the code for the device, you would use a 2 instead of a 1 for the first digit of the 5 digit code. make sure to program the audio device second, as the last device programmed will be used for audio control. You can try to search for your code by following these steps:
turn on your amplifier
press and hold MENU and OK until the power button blinks
repeatedly press the UP button until your amp turns off
press OK to lock in the code
Shaw Installations Tech
When I setup mine, the 2nd programmed code became the audio controls,
Sharp TV code 10093 Yamaha audio 30176
The Yamaha code being programmed 2nd changed the volume, but wouldn't operate the power on my Yamaha.
I didn't change the codes given though.
Any luck with this rbosch? If these steps aren't working, the remote may not have any codes which work with your amp.
Let us know.
Power on/off I don't think so
The volume, should be. The 2nd code programmed with operate the volume controls.
Retrieving data ...