HI - The new remote control has a new layout of buttons. Ok - so How can I set up my remote so that when I hit "power" it automatically turns on the TV and the PVR / Decoder ? My old remote did this.
Many thanks !!
993 is for changing the volume control - if you are using an Audio system, you will want the volume up/down to control Audio in cable mode, for example.
To setup Master Power:
Press and hold SETUP key until the last selected device key blinks twice.
Enter 9 9 5. The last selected device key blinks twice
Press PWR once.
For the first device you want on in the power on sequnce, press a device key (e,g, CBL) once. Then press PWR once. For the second device in the power sequence, press its key once (e.g. TV). Then press PWR.
Press CBL once
Press and hold SETUP until the CBL key blinks twice.
Which remote do you have? Programming Your Shaw Remote or here is the list of all the Shaw remotes www.urcsupport.com/shaw
Thanks kevin - I have the Atlas DVR 1056BC03
I have read throught the user guide for what there is of it and it does tell you how to join "AUD" to cable using the 993 code. However, if you try to do this trick with TV it does not join TV to cable.
Many Thanks !
Retrieving data ...