Cannot access on-screen guide from remote. Same problems with Settings button. Any thoughts?
The other functions/buttons work? Unplug the terminal for 30 seconds and then plug back in
Thanks. Tried that earlier. No dice. But just received helpful answer from Shaw guy. Answer... push cable button first , then Guide button.
I had this happen repeatedly as well... but it works after I pull the plug and plug it back in.
I've also had it do it where the guide and on demand buttons would work, but not the menu button...
(and no, it wasn't just slow to load, this would persist for 8+hrs if the set isn't unplugged and plugged back in).
There is also a way to program your remote with the Master power key,
so you only have to press the power key and all of your devices should turn on.
Retrieving data ...