My remote still turns the TV on and off but has stopped working on the cable box. I followed the instruction on the back of the remote to no avail. Batteries are good..... worked fine this morning. What do I do?
Instructions on the back probably made it worse, but.. If you have the Atlas remote, which you should for a DCT700, remote 1055 or 1056..
CBL press-and-hold Setup until CBL blinks twice,
982 after pressing the 2, the CBL light should flash two or four times, if it only blinks twice, start over above, if it blinks only twice again, move on
Press CBL, press-and-hold Setup until CBL blinks twice, enter 1376 CBL should blink twice after pressing the 6.
Try guide, menu, changing the channel, and so on, hopefully that will fix it
If that doesn't fix it, try rebooting the DCT700, unplug the power for 30 seconds and plug back in.
Were you able to get this working after trying Kevin's suggestions above?
Retrieving data ...