This issue was Fixed by the "Hold power in for 30 seconds and let box Re-boot"
Hi, I have connected HDMI, but when I hit Settings I get no Menu as expected, wondering if there is a known issue.
Channel seems to change etc.
Do you have a remote that has both a Settings and Menu button? Try the menu button if so. Also, make sure that if your remote looks like this that you have pressed the CBL button at the top first.
Thanks, my remote is the one with Settings and Menu printed just above.
I also have been sure to press CBL before trying.
TV Menu works fine.
When I try to bring up Cable Boc (DCX3200) menu I get no display.
I should mention the TV was moved from one side of the room to the other, and now the Coax to Wall is longer than it was.
Moving the box shouldn't make much of a difference, if you're not running into any other problems.
I would recommend that you try holding the power button down for 30 seconds until the box turns off, then turn it back on and see if that does the trick for you.
Let us know
Retrieving data ...