I bought an expander and when I installed it then turned it of I was unable to turn it back on again using the remote control without tuning the power off everything then on again
Should be no problems there. Let's try resetting everything. There's a certain process to follow which should get it working correctly.
1. Unplug HD box and Expander, disconnect the SATA cable from both sides
2. Plug Expander in, allow it two minutes to power up and sit idle
3. Plug SATA cable in at both sides
4. Plug HD box in, power it on
Hi there joblo65
If I understand correctly, the issue is that since installing an Expander, you've been unable to turn the PVR on using the remote. Is that correct?
If so, can you please confirm that the PVR responds to the remote while the Expander is not connected?
Yes the remote works fine when the expander is disconnected
Alright. Which model of cable box are we working with here?
Thank you it seems to work fine now
That's good to hear. You're welcome.
Retrieving data ...